Insights · Troubleshooting

Why Is My Printer Not Working? Common Problems and Solutions

Key takeaways

  • Print a test page from the printer itself to tell a printer fault from a computer or network fault.
  • A printer showing offline is usually a changed IP address. Reserve one in the router.
  • Clear a stuck queue by restarting the Print Spooler service and emptying its folder.
  • Download drivers only from the manufacturer's website.
  • Cheap inkjets are often cheaper to replace than repair, but a business laser is usually worth fixing.

When a printer stops working, the cause is almost always one of five things: a stuck print queue, a printer Windows reports as offline, a driver fault, a weak Wi-Fi connection, or a physical problem such as a jam or an empty cartridge. Work through the checks below in order and most problems take under ten minutes.

What should you check first?

  1. Look at the printer's screen. It often shows the answer: paper jam, empty toner, open cover or an error code.
  2. Check power, cables and paper. Reseat the power cable and any USB or Ethernet cable, and make sure paper is loaded and not damp or curled.
  3. Restart everything. Turn off the printer, the computer and the router. Start the router first, then the printer, then the computer.
  4. Print a test page from the printer itself. Use the menu on the printer (often called Print Report or Print Configuration Page). If it prints, the printer is fine and the fault is in the computer, driver or network.
  5. Try another device. Print from a phone or a second computer. If that works, the first computer is the problem.

Which symptom matches your problem?

Symptom Most likely cause First thing to try
Printer shows "Offline" Changed IP address or different Wi-Fi network Untick Use Printer Offline, then reserve an IP in the router
Jobs stay in the queue Stuck spooler Restart the Print Spooler and clear its folder
Prints blank or garbled Wrong or corrupt driver Remove the printer and install the manufacturer's driver
Stripes, faded or missing colours Clogged printhead or low toner Run the printer's cleaning cycle
Cannot scan to a folder or email Network sharing or login settings Check the share and update the printer firmware
Drops off Wi-Fi Weak signal or band mismatch Move it closer or use an Ethernet cable

Why does Windows say my printer is offline?

This is the most common problem. On Windows 11, go to Settings, Bluetooth and devices, Printers and scanners, select the printer and choose Open print queue. In the Printer menu, make sure Use Printer Offline is not ticked. Set the printer as your default as well.

If it keeps happening, the usual cause is the printer's IP address. Most home and office routers hand out addresses automatically, and the printer can get a new one after a power cut. Windows is then still looking for the old address.

The fix is a DHCP reservation in your router, which gives the printer the same address every time. Then, in the printer's properties on the Ports tab, check the port points at that address, or add it as a Standard TCP/IP port.

How do you clear a stuck print queue?

If a job will not delete, restart the spooler:

  1. Press Windows and R, type services.msc and press Enter.
  2. Find Print Spooler, right-click it and choose Stop.
  3. Open C:\Windows\System32\spool\PRINTERS and delete everything inside it. Do not delete the folder itself.
  4. Go back to Services, right-click Print Spooler and choose Start.

This takes a minute and does not remove your printer or settings.

What if it is a driver problem?

Printers print blank pages or garbled text, or disappear after an update, when the driver is wrong or damaged. Remove the printer in Settings, then download the current driver from the manufacturer's website (HP, Brother, Canon, Epson and others all publish them). Avoid third-party "driver update" sites, which often bundle unwanted software.

On shared printers in an office, errors such as 0x0000011b appeared after Windows security changes in 2021 and later. The answer is to update the computer hosting the printer and the computers connecting to it, not to remove the security update.

Old printers may not have a Windows 11 driver at all. If you recently upgraded from Windows 10 and the manufacturer offers nothing, that is a sign to replace it.

Why does my Wi-Fi printer keep dropping off?

  • Signal: printers have weak antennas. Move it closer to the router or an access point.
  • Band: many printers support only 2.4GHz. If your router combines 2.4GHz and 5GHz under one name, some printers have trouble joining, so check the printer's setup.
  • Security mode: older printers can fail on WPA3-only networks. Use WPA2 or a mixed mode for that network.
  • Address changes: reserve an IP, as above.
  • Best fix: plug the printer into the router with an Ethernet cable. Wired printers are more reliable, especially in an office.

If dropouts affect other devices too, the problem is the network. See how to improve your home Wi-Fi or our home Wi-Fi and NBN optimisation.

What about poor print quality?

For streaks, faded text and missing colours, run the printer's cleaning or printhead alignment from its maintenance menu. Inkjet heads clog when a printer sits unused, so print a colour page every week or two. Lasers show streaks when toner or the drum is nearing the end of its life.

Some printers, including those using HP's Dynamic Security firmware, reject third-party cartridges after an update. Third-party cartridges are usually fine, but check compatibility first.

Why won't scan-to-folder or scan-to-email work?

Older multifunction printers often scan to a shared folder using SMB1, which Windows turns off by default for security reasons. Update the printer's firmware so it uses SMB2 or SMB3 rather than switching SMB1 back on. Scan-to-email through Microsoft 365 is affected by Microsoft's move away from basic authentication. See support.microsoft.com for current guidance, or ask your IT provider.

Should you repair or replace it?

A basic home inkjet is often cheaper to replace than repair, especially if cartridges cost as much as a new printer. A business laser or multifunction printer that has been reliable is usually worth repairing.

Replace any printer that no longer gets drivers or firmware updates. Printers are networked devices, and out-of-date firmware is a security weakness. When you replace one, refillable ink-tank models can cut the cost per page for heavy home use.

A simple checklist

  • Print a test page from the printer to isolate the fault.
  • Restart the printer, computer and router in that order.
  • Clear the print queue and restart the Print Spooler.
  • Reserve a fixed IP address for the printer in the router.
  • Reinstall the driver from the manufacturer's website.
  • Use an Ethernet cable if Wi-Fi keeps dropping.
  • For an office printer that needs more than this, ask for business IT support.

FAQ

Questions people ask

Why does my printer say offline when it is switched on?

Windows usually shows offline when it cannot reach the printer, often because the printer's IP address changed or it joined a different Wi-Fi band. Check the printer's connection, make sure Use Printer Offline is unticked in the print queue, and reserve a fixed IP address for the printer in your router.

Why won't my printer print after a Windows update?

Updates can replace a working driver with a generic one or change security settings for shared printers. Remove the printer, install the latest driver from the manufacturer's website and add it again. On shared printers, update both the computer sharing the printer and the computers connecting to it.

How do I clear a stuck print queue?

Open Services, stop the Print Spooler service, delete the files in C:\Windows\System32\spool\PRINTERS, then start the service again. This removes stuck jobs without affecting your printer settings. It needs administrator rights.

Is it worth repairing an old printer?

For a basic home inkjet, usually not, because a repair often costs close to a new printer. For a business laser or multifunction printer that is otherwise reliable, repair is often worth it. Replace it if drivers or firmware updates are no longer available.

Why does my printer keep dropping off Wi-Fi?

Common causes are weak signal, a printer that supports only the 2.4GHz band, router settings that confuse older devices and a changing IP address. Move the printer closer or connect it by Ethernet cable, and give it a reserved IP address.

Keep reading

More on troubleshooting

Tell us what's going on. We'll tell you what it costs.

Free consultations for businesses. Fixed-price quotes before any work starts.

Private design preview