Home Wi-Fi

Fast, reliable Wi-Fi in every room of your home

For homes across Melbourne with dead zones, buffering or dropouts. We find the real cause, fix what's inside your home and tell you plainly when the problem is the NBN line.

$99 an hour (inc GST)

Why does the Wi-Fi drop off in some rooms?

Most home Wi-Fi problems start with where the modem lives. The NBN connection usually comes in at the front of the house, in a hallway cupboard or the garage, and the signal has to push through every wall between there and where you actually sit. Brick, tiled bathrooms, mirrors, fridges and foil-backed insulation all soak it up.

We see the same layouts again and again across Melbourne. Long single-fronted cottages in Yarraville, Seddon and Williamstown have the modem in the front bedroom and the living area three or four rooms back. Double-storey homes in Point Cook and Werribee often have the NBN box in the garage, with the bedrooms upstairs at the other end.

A plug-in range extender is the usual first attempt, and it often disappoints. Many basic extenders send and receive on the same radio, which can roughly halve the speed they pass on. A properly placed mesh system, or a single access point on a cable, is usually the better fix.

Is it my Wi-Fi or the NBN line?

This is the first thing we work out, because the fixes are completely different. Dropouts that start inside your home usually come from an ageing modem, one overheating in a closed cupboard, crowded Wi-Fi channels or devices clinging to a weak signal. Those are ours to fix.

Faults on the line are different. A degraded copper run on a fibre-to-the-node connection, a damaged lead-in cable or faulty NBN equipment can only be repaired by your provider and NBN Co. We check the modem's logs and connection history to see whether it's losing sync with the network or only dropping Wi-Fi.

If your NBN line itself is faulty, we'll tell you exactly what to report to your provider, with dropout times and test results to back it up. That gets you much further than another call that ends with "the line tests fine".

Mesh Wi-Fi, set up so it actually helps

Mesh Wi-Fi won't make your NBN faster. If you pay for a 100Mbps plan, the best mesh system in the world still gives you 100Mbps. What it does is deliver your plan speed to every room, instead of 100 next to the modem and single figures in the back bedroom.

How well mesh works comes down to placement and backhaul. Each node needs a strong link to the next, so it belongs partway towards the dead zone, not in it. Where a node can be cabled back to the modem, called wired backhaul, its wireless is freed up for your devices and speeds hold up far better at the far end of the house.

For things that don't move, like the TV, gaming console or a work-from-home desk, a cable still beats any Wi-Fi. It's faster, it doesn't drop out, and every device you take off Wi-Fi leaves more room for the phones and laptops that need it.

If cameras or a video doorbell are on your list, sort the Wi-Fi first, since weak signal at the front door is the most common reason they drop offline. We often do both as part of home security camera setup. If you work from home and can't afford a day offline, a 4G/5G backup data SIM keeps you connected through NBN outages. To try a few fixes yourself first, see our guide on improving your home Wi-Fi.

What you get

  • Room-by-room testing

    Signal and speed checked in every room, plus the places people forget, like the backyard, garage and upstairs bedrooms.

  • NBN dropout diagnosis

    Modem logs and connection history checked to work out whether dropouts start inside your home or on the NBN line.

  • Mesh Wi-Fi installation

    New or existing mesh systems set up with nodes where they'll actually work, and wired backhaul wherever a cable can reach.

  • Provider modem setup

    The modem your internet provider sent configured properly, or put in bridge mode behind a better router when it's the weak link.

  • Ethernet to TVs and consoles

    Wired connections for the smart TV, gaming console and home office desk, so they're not competing for Wi-Fi.

  • Wi-Fi security

    A strong WPA2 or WPA3 password, the router's default admin password changed, firmware updated and a separate guest network.

  • Before-and-after speed tests

    Results recorded in each room before and after, so you can see what changed.

How it works

How it works

  1. 01

    Tell us what's happening

    Let us know which rooms are worst, when dropouts happen and which NBN plan and modem you have.

  2. 02

    On-site assessment

    We test speed and signal around the home, check the modem and NBN equipment, and pin down where the problem starts.

  3. 03

    Fix and explain

    We fix what's inside your home and quote first if new hardware is needed. If the fault is on the line, we tell you what to report and give you the evidence.

  4. 04

    Test every room

    We re-test each room, show you the results and leave your Wi-Fi name and password written down.

Reviews

From people we've helped

What a legendary service, helped me with my gaming pc and got it back up and running.

Drew C.Gaming PC repair · Google

They know the software, games, and compatibility between different set ups… It's a beast of a rig and they really helped dial it in.

Dilan H.Workstation repair and tuning · Facebook

FAQ

Frequently asked questions

Will a mesh system make my NBN faster?

No. Mesh can't increase the speed coming into your home from your provider. What it does is carry the speed you already pay for into every room, so the back bedroom gets close to what you see next to the modem.

How can I tell if dropouts are my Wi-Fi or the NBN line?

Next time it drops, check whether a device plugged into the modem by cable drops too. If only Wi-Fi devices lose connection, the problem is inside your home, and that's what we fix. If wired devices drop as well, the cause is more likely the modem, the NBN equipment or the line, and we'll help you show that to your provider.

Is the modem from my internet provider good enough?

Sometimes. Provider-supplied modems are usually fine in a small apartment but often struggle to cover a double-storey house or a long single-fronted home. We check yours first and only suggest replacing it if it's genuinely the bottleneck.

What speed should I get over Wi-Fi?

On plans up to around 100Mbps, a modern phone or laptop near the router should get close to plan speed. On faster plans, Wi-Fi itself often becomes the limit, and a cabled connection is the only way to see the full figure. We test with your own devices so the numbers mean something.

Do you need to drill holes or run cables?

Usually not. Mesh nodes plug into ordinary power points and talk to each other wirelessly. If we think a cable to a node or the TV would make a real difference, we'll explain the options and cost before anything is drilled.

How much does it cost?

Home Wi-Fi, NBN and smart home work is $99 an hour, inc GST. We visit homes anywhere in Melbourne.

5.0 on Google

Priority 1 response in as little as 30 minutes

Partners

Get a fixed price before anything starts

Free consultation, a clear quote, and no work until you say yes. Most enquiries get a reply within the hour.

Private design preview