What not to do when a drive fails
The first hour after a failure often decides what can be recovered. A drive with a damaged head or weak sectors gets worse every minute it spins, so stop and avoid these mistakes.
- Don't keep powering a clicking or grinding drive. Clicking usually means the read heads can't read the platters, and a damaged head can scrape the surface your data sits on. Unplug it.
- Don't run free recovery tools on a failing disk. A full scan reads every sector, which is the hardest work a dying drive can do. Recovery software is for healthy drives with deleted files.
- Don't open the drive. The heads fly nanometres above the platters, and a speck of dust is enough to cause a head crash. That's why this work happens in a cleanroom.
- Don't format when Windows asks. "You need to format the disk" means Windows can't read the file system, not that the data is gone. Click Cancel.
- Don't rebuild or reinitialise a failed RAID or NAS, and don't swap disks around. Label each disk with its bay number and power the unit down.
Our guide on what to do with a dead hard drive covers this step by step.
What can and can't be recovered
Deleted files and corrupted file systems on a hard drive usually come back well, as long as nothing has been written over them since. Mechanical failures need cleanroom work, such as replacing the read heads so the drive runs long enough to be copied sector by sector.
SSDs are harder. TRIM wipes deleted blocks soon after a delete, so deleted files on an SSD are often gone for good. Encryption needs its key: a BitLocker drive can only be recovered with its recovery key, often stored in the user's Microsoft account or Entra ID. Macs with Apple silicon or a T2 chip tie the built-in SSD's encryption to the logic board, so if the board can't be repaired, the data usually can't be recovered.
How a recovery works
Every recovery goes to our partner lab, Fields Data Recovery. A failing drive often gets one good attempt, and a lab with a cleanroom and the right tools gives it the best chance.
Send the lab the details with the form on this page: the device, what happened and which files matter most. The lab assesses the drive and quotes a fixed price before any work starts, and nothing is recovered until you approve it. Your files come back on a new drive, never the one that failed.
Business clients can follow each case in the client portal: where it's up to, the quote, the approval and what came back.
So it doesn't happen again
The cheapest recovery is the one you never need. A tested cloud backup or a Synology NAS with snapshots turns a dead drive into an inconvenience. Once your files are back, we can set one up.